Subcategories
Piston SealsPolyurethane AU93A -31/176F [-35/80C] 290 PSI [20 Bar] | ![]() |
The PB-1-style a non-symmetrical pneumatic and low pressure hydraulic piston type U-Cup. Being Uni-directional in design, two PB seals must be used , back-to-back , in separate grooves to provide bi-directional pressure sealing.
Piston SealsPolyurethane AU93A -40/212F [-40/100C] 5800 PSI [400 Bar] | ![]() | ![]() |
PB profile is a non-symmetrical hydraulic piston type U-Cup. Being Uni-directional in design, two PB seals must be used , back-to-back , in separate grooves to provide bi-directional pressure sealing.
Piston SealsNitrile NBR 90A -22/212F [-30/100C] 1500 PSI [100 Bar] | ![]() | ![]() |
PB/N profile is a single-acting piston seal with an asymmetrical designed manufactured in homogeneous rubber material. It is particularly well suited for pneumatic or low pressure (˂1500 psi/100bar) hydraulic applications. Two PB/N seals can be used, back to back, in separate grooves to provide bi-directional sealing.
Piston SealsNitrile/Nylon -20/220F [-29/104C] 3000 PSI [205 Bar] | ![]() |
PH profile is a single-acting piston seals using a Nitrile (NBR) sealing lip for excellent sealability mated to a fitted reinforced nylon anti-extrusion ring.
Piston SealsNeo-Fabric/Polyacetal -22/212F [-30/100C] 7250 PSI [500 Bar] | ![]() | ![]() |
PR profile is a single acting piston seal, suitable for medium duty application; seal set consists of two elements: a) Acetal anti-extrusion wear ring. b) high specification NBR 80 shore and NBR impregnated cotton sealing element
Retainer RingsPolyacetal -40/230F [-40/110C] | ![]() | ![]() |
KR ,These split rings made of Acetal material are primarily used as retaining devices when used in conjunction with PR-style piston seals.
Piston SealsCast or ductile iron | ![]() | ![]() |
PZ SAE 660 split piston rings for high shock/high load applications, commonly used in conjunction with PH-style piston seals
Piston SealsNitrile/Steel -22/212F [-30/100C] 174 PSI [12 Bar] | ![]() |
P1B profile is a complete pneumatic piston with a double cup seal and a vulcanized metal disc support. It is fixed to the piston rod with a lock nut to avoid loosening during service.
Piston SealsNitrile/Steel -22/212F [-30/100C] 580 PSI [40 Bar] | ![]() |
P1B-1 is of similar design to the P1B-series but with added axial length for increased pressure resistance and better stability.
Piston sealsBR.PTFE/Nitrile -30/230F [-34/110C] 5800 PSI [400 Bar] | ![]() |
P2B Seals are two-part sealing units combining a low-friction, PTFE-based dynamic sealing element and an elastomeric loader ring insuring a fully energized device for both low and high pressure applications.
Back-up RingsNylon -40/250F [-40/121C] | ![]() | ![]() |
ST/N profile Nylon back-up rings are primarily used as anti-extrusion devices to be used along side two-piece P2B-type seals.
Piston SealsPolyurethane/Nitrile -22/212F [-30/100C] 5800 PSI [400 Bar] | ![]() |
Similar to the P2E-style, the P2B/U-style uses the aid of two compact sealing edge. This bi-directional piston seal offers perfect fluid control, constant preload as well as reduced friction and wear.
Piston SealsPolyurethane/Nitrile -22/212F [-30/100C] 5800 PSI [400 Bar] | ![]() |
This two-piece assembly has a tough polyurethane outside sealing ring offering both stability and extru-sion resistance. An elastomeric expander ring offers constant preload to insure good low-pressure sealing ability.
Piston SealsNylon/Nitrile (Step Cut) -22/230F [-30/110C] 11 600 PSI [800 Bar] | ![]() |
P2G profile is a high pressure, two-part seal set, consisting of a stepped-cut Nylon sealing ring and an elastomeric loader ring for producing pre-load.
Piston SealsNeo-Fabric/Acetal -22/212F [-30/100C] 6000 PSI [414 Bar] | ![]() |
P3C double-acting piston seal is a heavy-duty seal assembly used for split pistons. The center portion of the seal is manufactured from fabric-reinforced Nitrile, and an Acetal L-Shaped bearing ring is located at either end to protect from extrusion damage.
Piston SealsPTFE/Nitrile/Nylon -40/250F [-40/121C] 6500 PSI [440 Bar] | ![]() |
P4A is a bi-directional, piston seal for heavy duty applications. The PTFE cap and custom elastomer ring provide a low friction seal with excellent leakage control. The anti-extrusion rings allow for larger than normal piston clearances.
Piston SealsNitrile/Polyamide/Polyester -22/212F [-30/100C] 5800 PSI [414 Bar] | ![]() | ![]() |
P5B seals are designed for easy installation on one-piece pistons. Using a homogeneous center ring for excellent sealability, split nylon rings are added for extrusion resistance as well as split bearing rings for guiding.
P5B-1 Similar to the P5B design, these seals have a heavier footprint to serve in a more heavy-duty environment.
PS.230.00 X 210.00 X 16.00P.SEAL - AU
PS.235.00 X 210.00 X 20.00P.SEAL - AU
PS.240.00 X 215.00 X 16.00P.SEAL - AU
PS.240.00 X 215.00 X 19.00P.SEAL - AU
PS.240.00 X 215.00 X 20.00P.SEAL - AU
PS.240.00 X 220.00 X 12.00P.SEAL - AU
PS.240.00 X 220.00 X 16.00P.SEAL - AU
PS.250.00 X 225.00 X 16.00P.SEAL - AU
PS.250.00 X 225.00 X 19.00P.SEAL - AU
PS.250.00 X 225.00 X 20.00P.SEAL - AU
PS.250.00 X 230.00 X 12.00P.SEAL - AU
PS.250.00 X 230.00 X 16.00P.SEAL - AU