Rod Wipers There are 422 products.

Subcategories

• 

  WA

  Rod wipers Polyuréthane 92A -40/212F [-40/100C]

  WA-Style wiper rings are medium-duty exclusion devices, and are made to snap into standard housings. Their lip shape insures that contaminants such as sand, mud and other debris are removed from
  the cylinder rod.  

• 

  WB

  Rod Wipers Polyurethane 92A -40/212F [-40/100C]

  
  WB-style is a dual lip, dual function wiper. It insures proper wiping action of the rod and also acts as a secondary rod seal for both hydraulic and pneumatic cylinder applications.  

• 

  WC

  Rod Wipers Polyurethane 92A -40/212F [-40/100C]

  
  WC is a popular snap-in wiper style that fits into standard housings. A heavier cross-section insures that it will efficiently wipe most contaminants from the cylinder rod, while remaining stable in the housing. The precision knives-trimmed lip keeps the scraping edge of the wiper in an optimal position for maximum efficiency.  

• 

  WF

  Rod Wipers Polyurethane 94A -22/212F [-30/100C]

  
  Similar in design to the WC-style, the WF-style design has the added interference on the outside  diameter to prevent contamination into the cylinder via the static side of the groove.
• 

  WG

  Rod Wipers Polyurethane 92A -40/212F [-40/100C]

  WG-style is a dual-function unit, which wipes dirt and other contaminants from the rod while insuring seability as a secondary rod seal. The fluid retained by the wiper can be pumped back into the system via a leakage bore hole.  

• 

  WN

  Rod Wipers  Nitrile/Steel -40/250F [-40/121C]

  WN-style is a metal-clad, press-in wiper. Its protruding, sharp-edge wiping/scraping lip effectively keeps the foreign particles away from the gland area.  

• 

  WO

  Rod Wipers Polyurethane/Steel -40/212F [-40/100C]

  WO-style is manufactured from highly abrasion resistant polyurethane and bonded to a metal case, this press-in wiper is used to wipe and scrape tough materials especially on mobile construction equipment.  

• 

  WS

  Pin Wipers Polyurethane/Steel -40/212F [-40/100C]

  WS-style Used mainly to protect the pins that anchor hydraulic cylinders to articulated equipment, the WS-style is a single shell, polyurethane lip wiper ring.  

• 

  WR

  Rod Wipers Polyurethane/Steel -40/212F [-40/100C]

  Similar in use to the WO-style, the WR-style has the added benefit of being a double-lip design to aid
  both in secondary sealing and wiping applications.  

• 

  WT

  Rod Wipers Nitrile/Steel -40/212F [-40/100C] Polyurethane/Steel -40/212F [-40/100C]

  
  WT-style is used mainly to protect the pins that anchor hydraulic cylinders to articulated equipment, the WS-style
  is a single shell, polyurethane lip wiper ring.  

• 

  WV

  Rod wipers BR.PTFE/NBR -30/130F [-30/54C]

  
  With its aggressive O’Ring loaded design and a PTFE lip, this wiper offers great wiping and scraping action while insuring no particles can migrate through the static side of the groove.
• 

  WW

  Rod wipers PTFE/Nitrile -30/130F [-34/54C]

  
  Similar to the WV-style, the WW-style rod wiper incorporates a dual-lip configuration for added wiping action.
   

• 

  PPW

  Piston wipers Polyurethane -40/212F [-40/100C]

  
  PPW-style piston wiper is mainly used to keep foreign materials from entering single-acting hydraulic cylinders that have an opening to the atmosphere. The knife-edged lip offers excellent contaminant exclusion capabilities.